Ease of Use
Copyright © 2010 BERTL Inc.
February 2010
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 21
February 2010
Copystar CS 520i
www.BERTL.com
Above and below
To access the left side misfeed area,
the user must first slide out the finisher, then open the side
panel by lifting this gray button and lowering the panel.
Once open, the user can clear any misfeeds.
The CS 520i has two paper transport misfeed areas.
When a finisher is attached all jammed paper can be
cleared by opening the finisher door and following the
instructions on the panel door or the animated, step-by-
step instructions shown on the control panel.
