BERTHOLD TECHNOLOGIES LB 480, User Manual

Page: 387 / 450

SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 387
Volume 3 Menu Structure
3
2.61
Log
This menu provides information about the history of the error mes-
sages and parameter changes. Up to 25 events can be entered.
1 Error Log
Opens the menu displaying the errors that have occurred.
2 Modification Log
Opens the menu showing the history of the settings made.
2.62
Error Log
Menu path: Diagnostic

Log

Error Log .
Update the error log by selecting Refresh Error Log before you
select one of the following menu items. Otherwise, no or only old
entries may be displayed.
Tip
In chapter 8 on page 3-429 you find a list of possible causes and
troubleshooting procedures.
1 Active Detector No.

Choose the detector for which you want to show the current
entries or for which you want to display the pending error under
"Error Code".
• Detector No. = 0 shows the error entries in the master detec-
tor.
• Detector No. = 1 shows the error entries in slave 1.
• etc.
2 Refresh Error Log
Updates entries in the error log table.
3 Error Log Table
The last 25 errors are displayed in a table. The table contains the
error code and the time the error occurred. The prerequisite is that
the date and time were set correctly.
4 Reset Error Log
Deletes all entries in the error log.
5 Error Code
Indicates if an error message is present.
If no error is present, then "0" is displayed here.
An error message is displayed with a three digit number. The cause
of the error and suggestions for correcting the error are described
in
chapter 8 , "Error Handling" .
5 Acknowledge Error
Acknowledges the currently pending error.