Bertazzoni MD24X, Installation Manual

Page: 2 / 16

2 E
IMPORTANT– PLEASE READ AND
FOLLOW
• Before beginning, read these instructions thoroughly and
carefully.
• Because the kit includes metal parts, caution should be
used in handling and installation to avoid the possibility
of injury.
• Do not remove permanently affixed labels, warnings or
plates from the product as this may void the warranty.
• Observe all local and national codes, requirements and
ordinances.
• Installers should leave these instructions with the consumer
who should retain them for the local inspector’s use and
for future reference.
• For SAFETY CONSIDERATIONS do not install drawer in
any combustible cabinetry, which is not in accord with the
stated clearances and dimensions on page 4, See figure
1
.
ELECTRICAL GROUNDING INSTRUCTIONS
This oven must be electrically grounded in accordance
with local codes or, in the absence of local codes,
with the National Electrical Code,
ANSI/NFPA 70 – latest edition.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE. SUCH USE MAY RESULT IN FIRE,
ELECTRICAL SHOCK OR OTHER PERSONAL INJURY.
IMPORTANT SAFETY
INSTRUCTIONS
• WARNING: If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause
property damage, personal injury or death.
• WARNING: To reduce the risk of tipping, the Drawer Micro-
wave must be secured by a properly installed Anti-Tip block.
• This appliance must be electrically grounded in accordance
with local codes.
• Make sure the wall coverings and the cabinets around the
Drawer Microwave can withstand the heat generated by
the appliance.
• WARNING: Never leave children alone or unattended in the
area where a appliance is in use. Never leave the drawer
open when the microwave is unattended.
• WARNING: Stepping, leaning or sitting on the drawer may
result in serious injuries and can also cause damage to
the appliance.
• Do not use the Drawer Microwave as a storage space .
This creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not, touch
Stop/Clear to prevent unintended use.