Bertazzoni AMD6C61BX, Installation, Maintenance And Use Instructions, Page: 13 / 24

13
T
fig.16 fig.17
TABLE N°3:
TYPES OF POWER CORDS
Work surface operation Left Oven operation Right Oven operation Cross section
Only gas burner Ventilated Gas Oven Conventional Electric Oven
H05VV-F 3x1,
5mm²
Ventilated Electric Oven Conventional Electric Oven
H05VV-F 3x2,5
mm²
Electric Multifunction Oven
The appliance is equipped with a terminal for the electric connection placed behind, which is accessible removing the
posterior casing (Fig.17)
The cable of alimentation can be :
Operation at 220-240V ~ : use a H05BB-F three-wire cable (cable 3x2,5 mm²)
Operation at 380-415V2N ~ : use a H05RR-F o H07RN-F four-wire cable (cable 4x1,5 mm²)
Operation at 380-415V3N ~ : use a H05RR-F o H07RN-F five-wire cable (cable 5x1,5 mm²)
The power supply cable is suitable for appliance operating on 220-240 V~
BEFORE LEAVING
When the installation is complete, always check for gas leaks using a soapy solution. Never use a flame to make this
check.
Ignite all burners on high flame to ensure correct operation of gas valves, burners and ignition. Turn gas taps to low flame
position and observe each burner to ensure they ignite completely at all ports and that the flame is stable. Conduct these
checks for each burner individually and concurrently.
When satisfied with the appliance, please instruct the user on the correct method of operation. In case the appliance fails
to operate correctly after all checks have been carried out, please call the
Bertazzoni Service Center .
APPLIANCE MAINTENANCE
ATTENTION: IMPORTANT WARNINGS
For cookers resting on a base
ATTENTION: If the cooker rests on a base, take the measures necessary to prevent the cooker from sliding along the
support base.
For cookers with glass covers
ATTENTION: Before opening the appliance’s glass cover, carefully remove all liquid residues from the top of it.
ATTENTION: Before closing the appliance’s glass cover, make sure that the work surface has cooled.
For cookers with electric ovens
During use, the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.