6
1-4
Outline and application field
This machine adopts a new model single chip circuit: The single chip module board controls the
whole action of strapping, design of super undertone. The assembly of the whole machine is
precise and sophisticated, low noise will reduce the working pressure. The design of this new
model, with electric heating and steel sheet, helps to ensure that there will be no short-circuit.
When one duty cycle operation finishes, the machine will stop automatically to save power.
1-5 Safety
cautions
to operate machine
①
Please confirm the power supply for the machine. Do not plug in the wrong power supply.
This machine adopts a 2-phase and flex is grounding zero line as electric leakage guard.
②
Do not clean the machine with water, if the workplace is humid. The operating staff should
not operate the machine if wearing unsuitable footwear.
③
Do not change or increase and decrease the parts unless you have to.
④
Do not apply oil to the roller wheel surface of the transport strap.
⑤
While the machine is not in use, please disconnect the power plug.
⑥
Main parts and components listed in the manual should frequently be lubricated by oil.
(Refer to page 3-4-1).
⑦
As used in the industries of explosion-proof, explosion-proof motors and other electrical
appliances, these should be used in configuration.
⑧
Do not change, increase or remove any of the flame-proof parts freely. For surface
maintenance you must contact either the original manufacturer or your supplier.
⑨
Products used shall conform to the product specification, explosion-proof components
operating instructions and GB 3836.13 1997, 3836.16 GB - 2006 and GB 50257-1996 rules.
1-6
Machine radiation safety
Noise
：
≤
75dB(A)
