Remember if you need help contact Customer Care: 1+ (619) 449-2392
|5
Step 1:
Feed the Water Pump cord down
the pipe. The cord will be connected to the
Connection Port at a later step.
For the next step, the Fountain Tier will
install into the middle of the Large Bowl
assembled in step 1. Rest the Fountain Tier
on the side of the large bowl.
NOTE:
If the cables slip out
of the rubber stopper, you
can press the cables into the
slot in the side of the rubber
stopper. Maneuver the cord
to fit snugly inside the hole
that is located in the center
of the rubber stopper.
Step 3:
Firmly press the plug
into the pipe in the middle of
the Large Bowl.
If you are having trouble
pressing the plug into the
pipe, you can rub a small
amount of soapy water
on the plug to help it slide
into place.
Step 4:
To ensure that you
have a good seal, make
sure the plug fits snugly as
pictured above.
If your Fountain came with the Water Pump disconnected from the tube inside of
the Fountain Tier, refer to the “Water Pump Connection” section of this manual for
instructions on how to connect the Water Pump to the Fountain Tier.
Summary of Contents for Amore Hybrid Fountain, Bird Feeder & Planter
Page 1: ...C omo 4 I n 1 L ithium F ountain Owner s Manual...
Page 6: ......