Bernina Overlocker Plus, Workbook

Page: 13 / 26

13 7/01/16
BERNINA
Overlocker Workbook 2
Blindstitch Foot: Lace to Lace
Fabric: Flat edging lace, 2 pieces, 6” each
Needle: 70/10 Sharp or Microtex
Thread: 3 cones of overlocker thread
Presser Foot: Blindstitch Foot
Stitch: 3-thread rolled hem
Set the overlocker for a 3-thread rolled hem(right needle); adjust
the settings as directed below.
Attach the Blindstitch Foot.
Pull the Stitch Selection Lever toward you.
Raise the upper knife and lock it in the “up” position. You will not
cut fabric with this technique.
Move the fabric guide just to the left of the knife line on the stitch
plate.
Stiffen the lace with spray starch or fabric stiffener.
With right sides together, place the headers of the laces under
the
presser foot against the guide.
Overlock the laces together.
Gently pull the lace flat and press.
Suggested Settings
Others L 460/L 450
Upper Looper 3-5 3-5
Lower Looper 7-9 7-8
Left Needle N/A N/A
Right Needle 3-5 3.5
Stitch Length 1-1.5 1-1.5
Cutting Width 2-3 5
Differential Feed N 1