manualshive.com logo in svg

Bernina Kaffe 770 QE PLUS, Manual

Introducing the Bernina Kaffe 770 QE PLUS - a cutting-edge quilting and embroidery machine that brings creativity to life. With its user-friendly interface and advanced features, this powerhouse product enables you to unleash your sewing potential. Download your free manual now at manualshive.com to get started on your next masterpiece.

Share
Download
background image

Setup Program

59

> To switch off the sound for selecting functions, tap the corresponding «Switch Sounds On/Off» in area

(3).

> To switch on the sound for selecting functions, tap the corresponding in area _(3) «1 – 4».
> To deactivate the sound of the beeper when using the BSR Modes, tap «Switch Sounds On/Off» in the

sector  (4).

3.6 Machine settings

Selecting a language

The User Interface can be programmed in different languages according to the customer's wish because
BERNINA provides a wide range of international languages for the customers. Via firmware updates
additional languages for the User Interface can be provided.

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Language Selection».
> Select a language.

Adjusting the brightness of the display

The brightness of the display can be set to meet your individual needs.

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Screen Settings».
> Adjust the brightness of the display in the upper section of the screen.

Adjusting the sewing light

You can set the brightness of the sewing light to meet your individual needs.

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Screen Settings».
> Adjust the brightness of the sewing light in the lower section of the screen.

> Tap the switch to switch the sewing light off.
> Tap the switch again to switch the sewing light on.

Summary of Contents for Kaffe 770 QE PLUS













































































































































































































































Reviews:

No comments

Related manuals for Kaffe 770 QE PLUS

Singer 107-1 Instructions For Using Manual preview
107-1
Brand: Singer Pages: 8
Singer 281-21 Parts List preview
281-21
Brand: Singer Pages: 23
Pfaff 481 A Instruction Book preview
481 A
Brand: Pfaff Pages: 19
Sircle SircleBind CB-3000 Product Manual preview
SircleBind CB-3000
Brand: Sircle Pages: 6
MAGIC FX MFX0901 User And Installation Manual preview
MFX0901
Brand: MAGIC FX Pages: 20
JUKI MF-7700 Series Engineer'S Manual preview
MF-7700 Series
Brand: JUKI Pages: 75
T-COM Fax PA 300 Quick Reference Manual preview
Fax PA 300
Brand: T-COM Pages: 6
Janome CoverPro 1000CP Service Manual preview
CoverPro 1000CP
Brand: Janome Pages: 21
Superabrasive Lavina 25L HV Pro User Manual preview
Lavina 25L HV Pro
Brand: Superabrasive Pages: 29
Home Accents Holiday FM1000-ASH User Manual preview
FM1000-ASH
Brand: Home Accents Holiday Pages: 2
TECshow STRATUS 1000 User Manual preview
STRATUS 1000
Brand: TECshow Pages: 25
Duerkopp Adler 550-16 Spare Parts preview
550-16
Brand: Duerkopp Adler Pages: 25
Singer 111W106 Illustrated Parts List preview
111W106
Brand: Singer Pages: 12
Zhejiang Sansilou Industrial BECS-129S Manual preview
BECS-129S
Brand: Zhejiang Sansilou Industrial Pages: 112
Innovatech P32ND Owner'S Manual preview
P32ND
Brand: Innovatech Pages: 25
Brother 885-V95 Operation Manual preview
885-V95
Brand: Brother Pages: 204
Brother Industries CK-35 Instruction Manual preview
CK-35
Brand: Brother Industries Pages: 104
JUKI DSC-246 Instruction Manual preview
DSC-246
Brand: JUKI Pages: 32

Brands by name

Popular brands

Load more brands