manualshive.com logo in svg

Bernina Kaffe 770 QE PLUS, Manual

Introducing the Bernina Kaffe 770 QE PLUS - a cutting-edge quilting and embroidery machine that brings creativity to life. With its user-friendly interface and advanced features, this powerhouse product enables you to unleash your sewing potential. Download your free manual now at manualshive.com to get started on your next masterpiece.

Share
Download
background image

Sewing preparation

34

2.5 Spool pin

Swiveling spool pin

Installing the spool holder

With metallic or other special threads, it is recommend to use the swiveling spool pin.

The swiveling spool holder is necessary when several threads are sewn and it can also be used for bobbin
winding while sewing.

> Swivel the spool holder up as far as it will go.

Inserting foam pad and thread spool

The foam pad prevents the thread from getting hooked at the swiveling spool holder.

> Place the foam pad on the swiveling spool holder.
> Place the thread spool on the spool holder.

Horizontal spool pin

Placing the foam pad, the thread spool and the spool disc

The spool disc provides an even unwinding of the thread from the thread spool. The spool disc is only used
with the horizontal spool pin.

> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin.

Summary of Contents for Kaffe 770 QE PLUS













































































































































































































































Reviews:

No comments

Related manuals for Kaffe 770 QE PLUS

Janome 415 Servicing Manual preview
415
Brand: Janome Pages: 45
Janome 415 Instruction Book preview
415
Brand: Janome Pages: 32
Baby Lock Tempo BLTP Quick Reference Manual preview
Tempo BLTP
Brand: Baby Lock Pages: 12
Baby Lock Symphony BLSY Instruction And Reference Manual Addendum preview
Symphony BLSY
Brand: Baby Lock Pages: 56
Baby Lock Symphony BLSY Quick Reference Manual preview
Symphony BLSY
Brand: Baby Lock Pages: 20
Baby Lock Quilter's Choice Professional BLQP Instruction And Reference Manual preview
Quilter's Choice Professional BLQP
Brand: Baby Lock Pages: 51
Baby Lock Quest PLUS BLQ2-PL Instruction And Reference Manual Addendum preview
Quest PLUS BLQ2-PL
Brand: Baby Lock Pages: 2
Baby Lock Quest BLQ2 Instruction And Reference Manual preview
Quest BLQ2
Brand: Baby Lock Pages: 104
Baby Lock Jewel Features And Specifications preview
Jewel
Brand: Baby Lock Pages: 2
Baby Lock Ellisimo Gold II Quick Reference Manual preview
Ellisimo Gold II
Brand: Baby Lock Pages: 96
Baby Lock Solaris 2 Instruction And Reference Manual preview
Solaris 2
Brand: Baby Lock Pages: 224
Baby Lock Anna BL20A Instruction And Reference Manual preview
Anna BL20A
Brand: Baby Lock Pages: 76
Oki OKIFAX 5950 User Manual preview
OKIFAX 5950
Brand: Oki Pages: 248
HazeBase base hazer pro Manual preview
base hazer pro
Brand: HazeBase Pages: 9
Husqvarna 0210 Technical Brief preview
0210
Brand: Husqvarna Pages: 184
JUKI DU-1481 Series Instruction Manual preview
DU-1481 Series
Brand: JUKI Pages: 34
SunStar SC 7900-02 M6 A User Manual preview
SC 7900-02 M6 A
Brand: SunStar Pages: 47
Philips SE658 User Manual preview
SE658
Brand: Philips Pages: 76

Brands by name

Popular brands

Load more brands