Happy Voyager
Installing the Cap Device/Machine Set Up 22
With the cap frame driver mounted, the embroidery
design is automatically turned upside down and a
cap icon is displayed in the upper right hand corner
of the screen.
Note: If the cap icon is not displayed check the actu-
ating lever mentioned in the previous page.
Note: When using the cap frame a selection of the
cap frame type must be selected. (Normal or Wide
frame)
Select
OPTION
, press
SET.
After selecting
OPTION
, two Icons appear, the one
on the right is for machine options and the one on
the left is for pattern options. Select the
Machine
Icon
and press, “
Set
”.
Use the down arrow key to move to
17 Cap Frame
Type.
Press
SET
to activated, use the up/down
keys to change, press
SET
to accept change.
Select
ESC
to exit the frame menu and
ESC
again
to return to the drive menu.
In the drive mode next to the cap Icon a
W
is dis-
played.
Note:
The
Normal
cap represents a 67mm x 180mm em-
broidery field
The
Wide
cap represents a 67mm x 290mm em-
broidery field
