My
BERNINA
23
B E R N I N A S E W I N G M A C H I N E W O R K B O O K
PROGRAMMING ALPHABETS AND NUMBERS
Firm woven fabric, 4” x 6”
Lightweight tear-away stabilizer 4” x 6”
80/12 Universal
Polyester or cotton embroidery thread
Default
Open Embroidery Sole #20
For B 335 and 325 ONLY
1.
Attach Open Embroidery Sole #20.
2.
Place the stabilizer behind the fabric.
3.
Press the button (2) on the machine. The cursor and the
available number of empty memory spaces (e.g.30) start
to blink, and mem appears on the screen.
4.
Press the Alphabet button (5) to select the alphabet of
your choice.
5.
The letter A in the alphabet of your choice appears on
the disply
6.
Use the Arrow Buttons (4 and 6) to scroll the alphabet
• Select desired letter or number. For this lesson select
the B.
• Press the button (3); the letter is programmed.
• Scroll with the Arrow buttons to the letter E.
• Press the button (3); the letter is programmed.
• Continue in the same manner to add R, N, I, M, A.
(The M is purposely misspelled).
NOTE: When programming more than one word, select the
underscore symbol (_) to program a space between the
words.
7.
To correct the letter M to an N:
• Scroll with the left arrow (4) to the letter M.
• Scroll with the right arrow (6) to the letter N.
• Press the right arrow (3); the letter is overwritten.
8.
Stitch out the word BERNINA. Activate Pattern End after
the stitching has started so that the machine will stop at
the end of the word.
9.
To save the word into Memory, you MUST press the (2)
button. The contents are saved and Memory is closed.
This must be done before the machine is turned off.
The contents of Memory remain saved even when the
machine is switched off and can be recalled at any time.
To delete the complete Memory contents:
• Press the clr button, keep depressed and press the
button (2). Release both buttons.
• Leave Memory by pressing the button (2).
• Memory is now completely deleted and new
lettering can be added.
