Attachment
178
Message on the display
Cause
Repair
No BERNINA USB stick is inserted.
Make sure that during the
complete automatic update
always the same BERNINA USB
stick remains inserted.
The BERNINA USB stick (optional
accessory) is not inserted.
> Use a BERNINA USB stick (optional accessory)
providing enough free capacity.
The update of the software has
failed.
The latest software version cannot
be found on the USB stick.
> Make sure that the compressed zip file has been
unzipped for the software update.
> Check whether the data for the software update are
saved directly on the data medium and not in a file on
the USB stick.
> Update the software.
The machine needs cleaning/
lubricating.
> Clean the machine.
> Lubricate the machine.
Important information on lubricating:
> Too much oil can pollute the fabric and the thread.
> After lubricating, embroider a test piece first.
The automatic thread cutter (at
the thread catcher) needs
cleaning.
The automatic thread cutter needs
cleaning. The message appears
every time when the machine is
started as soon as 1000 cutting
cycles have been carried out.
> Touch the icon «Confirm».
– The machine calls up the function «Clean the
thread catcher».
> Clean the thread catcher according to the instructions
on the display.
–
The counter for the cutting cycles is reset.
Summary of Contents for 765 SPECIAL EDITION
Page 1: ...BERNINA 765 SPECIAL EDITION...
Page 200: ......
