Left Power Infeed
Left Power Add-On
Note: All power and wiring is pre-installed on starter
and add-on tables. Specify a right or left power infeed
for the starter and add-on table configurations.
After you have finished connecting your jumper whips you can tuck them back into the
table trough, a concealed under mounted storage system, and move on to connecting
your next table.
Single Under Mount Power and Connection
Installation Accessories
Connection Instructions
Starter Table
Add-on Table
Yuno offers a proprietary under mount power solution allowing quick and easy “daisy chaining” tables together. For
single module configurations, up to 8 tables may be connected on a single power infeed. The single under mount
power configuration features a module with two receptacles mounted in the center of the table. The power
assembly and the Yuno tables are UL 962 and CSA 22.2, No. 203.2 approved. The illustration below is of a Yuno
starter table which must be specified to begin a run of tables.
Contains (2) 15 amp receptacles.
A modular connection to help the user connect multiple work
surfaces.
Control module with 10’ grounded plug. Allows users to
connect up to 8 modules off of one feed. (8) 55” tables and
(4) 63” tables.
A plug designed to be inserted into a receptacle in one position
only
.
When starting to connect your power you first need to identify your starter table SKU (pictured above is a starter table, found with a power
module control unit and grounded plug). Next you will want to gang your starter table with your first add-on table using the separately
purchased ganging brackets. To power the add-on table, pull the long modular connector wire from the starter table through the wire
management clips. Locate the modular connector near the edge of the adjacent table trough. Match the keying, indicated by the arrows on
the modular connects, and press the connectors together. Repeat for all tables in line.
55”w Tables
: A maximum of (7) add-on tables are
possible for a total of (8) daisy chained tables.
63”w Tables
: A maximum of (3) add-on tables are possible for a total of (4) daisy chained
tables.
Single Under Mount Power Module
Modular Connector
Power Module Control Unit
Power Module Wiring
B
C
D
Attaches to the bottom of the table, helps secure whips
when connected. Approved for GSA.
Wire Management Clip
E
A
single under mount power
yuno electrical installation instructions
6
