EXPRESS DUAL 4000
© Bernhard and Company Limited
14
6.3
To ensure that the correct position for the mower unit has been achieved, both control
wheels (right hand and left hand) should be wound in a clockwise direction so that the
grinding wheel may be placed to contact each end of the reel evenly. If the grinding wheel
touches the bedknife or any part other than the reel, the whole unit must be moved by
adjusting the position of the multifix brackets or roller brackets. The exact position required
will be easily seen by looking along the mainshaft from one end of the machine as the
stone is raised to check that the point of contact is in a suitable position (see Figure 6.3).
NOTE
If the cutting unit has no front roller fitted so that the multifix brackets are used then, once
the correct position for any particular unit has been finalised a “set up guide” should be
completed and filed for future reference so that the identical multifix brackets positions can
be used for all subsequent applications on the same type of unit.
6. In-frame Grinding
(Continued)
Fig: 6.3
Reel
blades
Front Roller position
is adjustable
Grind stone has to contact
reel blades for sharpening
without
touching anything else
Adjustable Front
Roller support
Position of
bedknife is
adjustable
Summary of Contents for EXPRESS DUAL 4000
Page 2: ...EXPRESS DUAL 4000 Bernhard and Company Limited NOTES...
Page 57: ...EXPRESS DUAL 4000 Bernhard and Company Limited 57 TOOLKIT UPTO SERIAL NUMBER 22560...
Page 59: ...EXPRESS DUAL 4000 Bernhard and Company Limited 59 TOOLKIT SERIAL NUMBER 22561 ONWARDS...
Page 77: ...EXPRESS DUAL 4000 Bernhard and Company Limited NOTES...
