16
| English
1 609 929 U97 • 22.9.10
Always keep the tool holder
2
and the insert tool clean
to ensure the locking and releasing function of the
locking sleeve
3
.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for
Berner power tools.
In all correspondence and spare parts orders, please
always include the 6-digit order number given on the
nameplate of the machine.
Transport
Dispatch batteries only when the housing is undam-
aged. Tape or mask off open contacts and pack up
the battery in such a manner that it cannot move
around in the packaging.
When dispatching lithium-ion batteries, compulsory
labeling may be required. Please observe the respec-
tive national regulations.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its imple-
mentation into national right, power
tools that are no longer usable must be
collected separately and disposed of
in an environmentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions in
section “Transport”, page 16.
Do not dispose of battery packs/batteries into house-
hold waste, fire or water. Battery packs/batteries
should, if possible, be discharged, collected, recycled
or disposed of in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 2006/66/EC.
Subject to change without notice.
OBJ_BUCH-175-003.book Page 16 Wednesday, September 22, 2010 3:44 PM
