USER MANUAL
(EN)
Blue Fire III with Tank
Art. 413516
NOTE: The Blue Fire III is delivered
with an empty gas tank! Please read
all structions and warnings before
use!
FOR THE FIRST USE:
· Fill the tank with butane gas
(Berner 414185 or 414186).
· To fill or refill, turn the Blue Fire III
upside down. Place the butane can
above and connect to the filling valve
(5).
· Press now the butane can firmly into
the filling valve (5). The tank should be
filled in a few seconds. Sometimes you
must do it after a minute again. If the
gas comes out of the tank, the tank is
filled with gas.
NOTE:
After filling, the Blue Fire III
should have a few minutes to stabilize
the gas inside the tank. Butane gas will
not work correctly below 5°C. Because
the Butane boiling point is +- 0°C.
HOW TO USE:
· Press in the safety button (3) on the side
of the Blue Fire III. While depressed,
push down the ignition button (1).
· Hold the ignition button pressed while
working. You can release the safety
button (3).
· Release the ignition button to stop the
Blue Fire III working-
· To adjust the flame power, move the
flame adjuster to + or –.
