29
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling and short circuit
situations that cause high current draw, the tool will vibrate for
about 2 seconds and then the tool will turn OFF.
To reset, release the trigger.
Under extreme circumstances, the internal temperatur of the
battery could become to high. If this happens, the battery will shut
down.
Place the battery on the charger to charge and reset it.
BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the
machine automatically. To restart, switch the machine off and then
on again. If the machine does not start up again, the battery pack
may have discharged completely. In this case it must be recharged
in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance
with local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated
to prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Clean tool and guarding system with dry cloth. Certain cleaning
agents and solvents are harmful to plastics and other insulated
parts. Keep the apparatus handle clean, dry and free of spilt oil or
grease. Check the function of guards. Regular maintenance and
cleaning provide for a long service life and safe handling.
Use only Berner accessories and spare parts. Should components
need to be replaced which have not been described, please
contact one of our Berner service agents (see our list of guarantee/
service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the ten-digit No. as well as the machine type printed on the
label and order the drawing at Berner.
Clean only with dry cloth. Certain cleaning agents and solvents are
harmful to plastics and other insulated parts. Keep the apparatus
handle clean, dry and free of oil or grease.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the machine.
Please read the instructions carefully before starting
the machine.
Wear gloves!
Wear ear protectors!
Always wear goggles when using the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
n
0
No-load speed
V
Volts
Direct current
Rotation direction
European Conformity Mark
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the
firm Berner.
The warranty period of 36 months for tools and 12 months for
batteries and chargers starts on the date of purchase which must
be verifi ed using the original receipt. During the guarantee period
the producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment
or excessive force are not covered by the warranty. Furthermore,
only original accessory parts may be used, which Berner has
expressly identifi ed as suitable for the operation with Berner
machines.
You can fi nd out the location of your nearest customer service
workshop in the address list at the back of this document.
ENGLISH
457 068 - Berner-BACCS BL18V.indd 29
457 068 - Berner-BACCS BL18V.indd 29
01.02.2019 17:28:46
01.02.2019 17:28:46
