Bernee BN-800F, Manual, Page: 5 / 8

Bernee
®
5 / 8
10 001010 42 101010
11 001101 43 101011
12 001100 44 101100
13 001101 45 101101
14 001110 46 101110
15 001111 47 101111
16 010000 48 110000
17 010101 49 110001
18 010110 50 110010
19 010011 51 110011
20 010100 52 110100
21 010101 53 110101
22 010110 54 110110
23 010111 55 110111
24 011000 56 111000
25 011001 57 111001
26 011010 58 111010
27 011011 59 111011
28 011100 60 111100
29 011101 61 111101
30 011110 62 111110
31 011111 63 111111
（
1
）
Dialup switcher: ON=1; OFF=0.
（
2
）
Address encoding is based on binary system.
（
3
）
Some hosts addresses initiate as 0, and some initiate from 1.
10. Common Faults Analysis & Solutions
Fault Features Analysis & Solutions
Powered light cannot shine
1. Whether supplied voltage is AC220V
2. Maybe power switcher shut or fuse burnt
Out of control
2. Whether PC system is normal and whether communication port
setting accords with hardware requirement
3. Whether address code switcher setting accords with controlled
camera address (for NO.1 camera address, some hosts show as
0; but some hosts show as 1)
4. Protocol setting incorrect
Close control available; remote
control unavailable
1. RS485 converter lacks driving force for output.
2. Wiring distance over 1200m should add RS485 repeater or
RS485 distributer.
11. Wiring Diagram: