Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 139 / 160

Maintenance / Servicing • Exchanging the Connection Cable
Ch
apte
r 7
Ma
inte
nanc
e /
Servic
ing
139 Mobile Panel User's Manual V 1.5
7) Connect the Mobile Panel attachment cable to the panel (ST2, ST3, ST4, ST5, ST6). See
figure 31 "Connection cable 5CAMPH.0xxx-00" on page 64 for connecting the cable. Cables
may only be guided through the housing opening identified in figure 67 "Connectors and
cable arrangement" (see arrow).
Figure 67: Connectors and cable arrangement
Information:
When connecting the Ethernet RJ45 connector (ST5) and the power supply
connector (ST4), make sure that the connector locking mechanisms are engaged.
Ethernet RJ45 (ST5)
Entry devices (ST3) CAN (ST6)
Supply
Ground (ST4)
RS232 (ST2)