10
CN_ILLU_NRSpeakerUnitDetaching3_BW_HI
CN_ILLU_NRSpeakerUnitDetaching1_CMYK_HI
CN_ILLU_NRSpeakerUnitDetaching2_BW_HI
detaching the Speaker unit from a Nano RITE Hearing System
1 Use the pointed end of the disassembly tool to
push the lock pin free.
2 Hold the instrument firmly with one hand
and with the other hand hold the edge of the
connector plug between your thumb and
forefinger.
3 Gently pull the connector plug out of the
socket. If it does not come out easily, verify
that the lock pin is completely free.
4 Avoid losing the lock pin due to the fact that
you will need it for reattaching the speaker to
the hearing instrument.
Do not attempt to detach the speaker unit
by pulling on the wire without pushing
the lock pin free. This could damage both
the speaker unit and the hearing
instrument.
1
2
3
134056_NR_Fitting_Guide_generic_US_Private_Label.indd 10
14.03.13 13:37
NaNo RITE HEaRINg SySTEmS
11
m-Speaker unit
The M-Speaker unit is suitable for mild to moderately severe losses and comes in four lengths. It can
be used for both instant and custom fittings.
1 To obtain a more secure hold in the ear canal,
an ear grip should be used. The same version
works for both the left and the right ear. Insert
the ear grip in the slot in the receiver as
shown, noting the orientation.
If the ear grip seems too long, it may be
trimmed to the desired length. Be careful not
to leave a sharp end when cutting since this
could cause irritation in the ear.
2 To remove the ear grip, push it in the opposite
direction.
CN_ILLU_NREarGripMspeakerAttaching1_BW_HI
CN_ILLU_NREarGripMspeakerAttaching2_CMYK_HI
CN_ILLU_NREarGripMspeakerAttaching3_CMYK_HI
CN_ILLU_NREarGripMspeakerAttaching4_BW_HI
During insertion, the top of the ear grip
should point towards the speaker wire as
illustrated. Pull the ear grip down until
the top disappears into the slot.
If inserted in the wrong direction, the
ear grip will not be oriented properly to
place in the concha.
1
2
134056_NR_Fitting_Guide_generic_US_Private_Label.indd 11
14.03.13 13:37
