Bernafon
Radio Model - Quick Installation Guide
Radio Model
Name:
Bernafon
BTE UP
3
On the bottom side of the main PCB of the
Bernafon
BTE UP
radio model the connector for the speaker unit assembly (where the wire antenna for the
Bluetooth radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF
chip for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The
Bernafon
BTE UP
radio model also includes all
voltage regulators and buffered data programming inputs on board. The DSP is the main processor controlling the functionality of both radios in the
Bernafon
BTE UP
radio model.
Bernafon
BTE UP
Radio Model – Main PCB – Bottom side
