124
1015002x00
Replacing the Driving System
en
9.2.3
Switching to EXCOR Active
3.
Configure the driving unit, see section 8.5: Configuring the System, page 98.
Transfer the following parameters from Ikus to EXCOR Active (for each sup-
ported side in BVAD mode):
•
Operating mode
•
Cannula sizes
•
Size of the blood pump
•
Rate
•
Synchronization
type (in BVAD operating mode)
•
Initially, leave the parameter
Duration
systole set to the standard value of
50%.
4.
Start operation of the blood pump(s) on the driving unit.
5.
Position the driving unit on the Ikus so as to allow fast and secure reconnec-
tion of the driving tube.
1.
Lay the patient on his or her back. Perform the following steps (for each sup-
ported side in BVAD mode):
2.
Connect the flow sensor to the cannula.
3.
Connect the flow sensor to EXCOR Active.
4.
Remove the seal plugs from the EXCOR Active driving unit.
5.
Switch the driving tube connection from Ikus to EXCOR Active.
6.
Check filling and emptying of the blood pump and adjust as needed.
7.
Set the
Flow alarm threshold
.
8.
Attach the cable wrap.
9.
Allow Ikus to remain active for a while, in parallel with the EXCOR Active driv-
ing unit. Switching back is easy to do if necessary. Connect the tank unit so
that Ikus does not run with the pneumatic connections open.
10.
Adjust the parameters for mobilization purposes, see section 8.8.3: Mobilizing
Patients, page 111.
Summary of Contents for EXCOR Adult
