Setting the operating modes
picture 3: Operating mode switch
Three operating modes can be set using the operating mode switch (4) on the motion detector
(picture 3).
Setting the Continuous off operating mode
o
Switch the operating mode switch (4) to the
O
position (picture 3).
The lighting is switched off permanently.
If a dimmer insert is used, then dimming will take place and the lighting will switch off after
approx. 30 seconds.
i
With Continuous off, switch-on via the extension is not possible.
Setting the Continuous on operating mode
o
Switch the operating mode switch to the
I
position.
The lighting remains permanently switched on at the current brightness. If the lighting is
switched off, then the switch-on brightness is set.
i
With Continuous on, switch-off or dimming via the extension is not possible.
Setting the Automatic operating mode
o
Switch the operating mode switch to the
AUTO
position.
The lighting switches automatically, switch-on via an extension is possible.
Seite 4/10
22.07.2010
82540231
97-82640-201
BLC
BLC motion detector comfort 1.1 m
