2/6
09/2015
Blind insert comfort
2. Design and layout of the device
(2)
(1)
(3)
(5)
(4)
(6)
Figure 1: Shutter insert
(1) Shutter insert
(2) Frames
(3) Application module bottom part e.g. from a push-button for blinds
(4) Screw for dismantling protection (not R.1/R.3)
(5) Blind button design cover
(6) Connecting terminals
3. Function
Correct use
–
Switching electrically operated blinds, shutters, awnings and similar hangings.
–
circuiting of extension units push-buttons for blinds, blind inserts, key push-buttons for
blinds
–
Only suitable for use in indoor areas with no drip and no spray water.
–
Installation into wall box according to DIN 49073.
–
Operate with suitable application module (see Chapter 6.2, "Accessories")
Product characteristics
–
2 mechanically and electrically mutually locked relay contacts.
4. Operation
These instructions describe the installation of the shutter insert. The operation and function of
the application modules are described in the instructions of the respective application module.
The operation of extension units is only possible if a cover is attached to the main unit.
