34
REAL-TIME
When real-time mode is selected, data currently being collected by the WolfHound Pro is
displayed over time. This is displayed in a temporal graph from right to left. There are
approximately 5 reports per second. The signal strength is reported between 0 and 100.
When the signal strength goes above the currently set threshold (see SETTINGS) the area under
the signal strength will appear red. The area will stay red until the signal strength falls below
the threshold again.
When the threshold has been eclipsed, counters will be updated. These counters include:
REGISTRATIONS
TEXT MESSAGES
CALLS
Depending on the length of a threshold incursion, one of these counters will be updated. If it is
a short burst, it will simply be a phone registering with the network. Slightly longer would be
perhaps a text message. Finally, a lengthy incursion would be an actual phone call.
These counters can be cleared at any time by pressing the “CLEAR COUNTS” button.
There is also a bar to the right of the temporal screen which displays the current reading. The
color changes as the level gets higher.
Summary of Contents for wolfhound pro
Page 1: ...User s manual version 1 6...
