Berkel X13AE, Owner'S Manual

Page: 10 / 16

8 • X13 & X13A o
wner
/o
peraTor
m
anUal
8 • X13E & X13AE O
wner
/O
peratOr
M
anual
Loading product
1.­ Make­sure­the­index­knob­is­fully­closed.­Pull­the­pusher­to­the­top­and­let­
it­drop­behind­the­table.­Set­the­product­onto­the­table­with­the­side­of­the­
product securely against the front edge of the product table and place the
pusher­behind­the­product.­Turn­the­slicer­on­and­rotate­the­thickness­control­
knob­to­set­the­proper­thickness.­When­pushing­the­product­table,­always­
use­the­product­table­handle.
2.­ For­smaller­products­like­salami,­you­can­rotate­the­pusher­so­that­it­holds­
the­side­of­the­product.­The­fence­can­be­used­for­even­more­control­in­
­holding­the­product.­The­fence­is­attached­to­the­product­table­by­placing­the­
bottom­of­the­fence­underneath­the­table­at­a­45°­angle­and­pushing­it­down­
against­the­product­table.­To­move­it­next­to­the­product,­push­down­on­the­
back­of­the­fence­so­that­it­rises­up­to­a­45°­angle­and­set­it­against­the­edge­
of­the­product.­Push­the­fence­down­to­secure­it­to­the­product­table.­ You
can not release the fence by lifting up on the bottom edge of the fence.
­­­­­WARNING
To­prevent­the­possibility­of­serious­cuts,­never­push­the­product­toward­the­knife­with­your­hands­
or­by­pushing­on­the­pusher­handle.­Only­put­your­hands­on­the­product­table­handle.
Cleaning and Sanitizing
The­following­cleaning­procedures­have­been­prepared­with­the­grateful­
­cooperation­of­Kay­Chemical,­an­Ecolab­company.
Supplies:
Dish­Detergent­such­as­KAY
®
­Pot­&­Pan­Detergent
Sanitizer­such­as­KAYQUAT
®
­II
Nonabrasive­Pad
Nylon Brush
Cut-Resistant­gloves
Cloth­wipes
Procedure:
CAUTION: Use extreme care when cleaning blade.
1.­ Close­the­slicer­thickness­control­knob.
2.­ Turn­the­slicer­off­and­unplug­power­cord­from­the­wall­outlet.
3.­ Pull­the­product­table­to­the­front­of­the­slicer.­If­it­is­an­automatic­slicer,­make­sure­the­engagement­
knob­is­in­the­manual­position­before­pulling­the­product­table­to­the­front­of­the­slicer.