PM30 & PM40 O
WNER
/O
PERATOR
M
ANUAL
• 11
•
Turn the timer to “hold” position, shift to the desired speed and then move the start toggle button.
•
Transmission adjustment may be necessary. Contact your nearest Designated Berkel Service
Location.
Overload circuit breaker tripped
•
Mixer is overloaded causing the circuit breaker to trip. See the Product Capacity Chart on page
13.
Mixer slips out of gear under load
•
Make sure the shift lever is adequately engaged.
•
If mixer shift lever is adequately engaged and slipping still exists, then contact your nearest
Designated Berkel Service Location
Product not being properly mixed at the bottom of the bowl
•
Inadequate water to product ratio (AR)
•
Excessive clearance at the bottom of the bowl and attachment. Contact your nearest Designated
Berkel Service Location.
R
EPAIR
P
ARTS
/R
EPAIR
S
ERVICE
Please contact your nearest Designated Berkel Service Location for any repair parts and/or repair
service required on your Berkel slicer. A list of DBSL’s can be found on the website at
www.berkel.com
. Pull down the service tab and then click on your start for the nearest DBSL.
Additional information may be obtained from:
Technical Service Support Center
Berkel Company
4406 Technology Drive
South Bend, IN 46628-9700
(574) 232-8222
(800) 348-0251
