8 • 909E & 919E O
WNER
/O
PERATOR
M
ANUAL
T
ESTING
P
RIOR
TO
O
PERATION
WARNING
SHARP KNIFE
TO AVOID SERIOUS PERSONAL INJURY:
1.
NEVER touch rotating knife.
2.
Keep HANDS CLEAR of all MOVING PARTS. Use PRODUCT TABLE HANDLE—
not your hand.
3.
Always TURN OFF slicer when NOT IN USE.
4.
Always TURN thickness control knob as far to the right as possible when NOT IN USE.
5.
TURN OFF and UNPLUG machine before CLEANING or SERVICING.
G
ENERAL
1.
Make sure the machine is unplugged.
2.
Check to see that the center plate, product table and sharpener assembly are in proper position.
3.
Turn thickness control knob as far to the right as possible. This positions the gauge plate so that the
knife is not exposed during testing.
WARNING
TO AVOID SERIOUS PERSONAL INJURY,
NEVER TOUCH SHARP KNIFE.
4.
Plug the power cord into a GROUNDED, APPROVED electrical outlet, using the plug that is
provided with the machine.
M
ANUAL
O
PERATION
Note: Make sure on the Model 919E slicers that the shift lever is in the manual position.
1.
Turn the unit on by pushing the START switch up to its highest position, then release so that it goes
back to the middle position. The knife will start slowly, then speed up.
