Balance Rates
The balance rate is used to reverse a condition. For example if you were to tune into the
targets witness sample seeking the cause of the condition you could then balance it, and
the balance rate could then be imprinted to a remedy or broadcast back to the target to
alleviate the cause of the condition.
1. Tune into the targets witness sample that is placed on the input plate using the
methods described previously.
2. Lets assume for this example that you have tuned into the numbers 497 on the
dials. Now to set the balance rate you need to subtract these numbers from the
base number in this case 10, or the dials maximum range.
3. 10 – 4 = 6, 10 – 9 = 1, and finally 10 – 7 = 3
From this we can say that the balance rate for the cause of the condition is 613
4. To broadcast this complimentary balance rate to the target from the witness sample
you used to analyse and generate the rate, simply remove the witness sample from
the input and place it on the output for broadcasting
5. If you wish to make a remedy from the balance rate, then remove the target sample
from the input plate, and place your remedy solution on the output plate for
imprinting.
