SLIM FIT
Air conditioning for vehicles
9
EN
ºC
ºF
TEMP
ON/OFF
1.- On/off
switch on /off the unit and functioning selection mode.
2.-
Indicate the compressors functioning.
3.- Display:
Screen where it shows the slected functioning and condition of the unit.
4.- Temperature selectors :
To select the surrounding temperature and the blower speed
(this only in manual mode) , remote control programmation and Fahrenheit degrees.
• When you connect, the engine make leds control and you can read
88--SC
on the display
and the engine swith off.
Remote control functions:
Switching on /off of equipment.
Blower speeds control.
Temperature control.
How to activate remote control:
In order to activate remote control, while equipment is switched off, push key
from control
panel until
C
C
flashes on display. When it stops flashing, push the On/off key on in the remote
control. You will have to do it within 30 seconds or else you will have to repeat the whole
operation.
Control panel
Remote control
2
3
1
1
2
3
4
1
2
3
Special display symbols
(
please see troubleshooting manual
)
:
Lb
: Low battery.
EO
:
Poor contact of the sensor wires or sensor failed.
E2
:
Electrofan or blower failure.
E9
:
Compressor protection (cabin tilted).
