- 16 -
- 17 -
!
• “TEMP”
The pre-set temperature stage is selected and the device turns on temperature stages between
60°C - °C (140°F - 450°F)
. With the arrow keys, you can change the settings at any time. The
LED-display “TEMP (°C)” flashes up. (132°C - 270°F is the standard start temp when the unit is
first turned on TEMP)
• “TIMER”
After selection of the operating mode (power stage or temperature stage), press the “Timer”-
key. The number “0” appears in the display and the LED-display “TIMER (min)” next to the dis-
play flashes up. By using the arrow keys, you will be able to select the operating time in intervals
of 5 minute (5” up 1” down) up to 150 minutes maximum (Some units may start at 150 minutes
which is the max allowable time of one single use and can be time corrected down from there).
The time will be counted down in minute steps, whereupon the display returns to the prior status
(POWER, TEMP). If you want to check the cooktime left, just press the “Timer” button again.
Once the time is up, an acoustic signal sounds and the device automatically goes in standby
mode.
NOTE!
During timer operation, you can change the duration at any time with the arrow keys. With the
memory function of the appliance, the power stage or temperature settings remain unchanged
here.
Specific for 1810003 - 2216750
• “Power” (1x pressing the “Function” button)
The pre-set power stage “5” is selected and the device turns on. With the arrow keys, you can
change the settings at any time, ranging from 1-10. LED-display “POWER” appears.
• “Temp” (x pressing the “Function” button)
The pre-set temperature stage “10°C - 70°F” is selected and the device turns on. With the
arrow keys, you can change the settings at any time, ranging from
60°C - 00°C (150°F - 90°F)
.
LED-display “TEMP (°F)” appears.
• "Timer" (x pressing the “Function” button)
After having selected the operating mode (power stage or temperature stage), press the “Timer”
key. The number “0” appears on the display and the LED-display “TIMER (min)” next to the
display appears. By using the arrow keys, you will be able to increase the time in intervals of 5
minutes, up to 150 minutes maximum. You can alse decrease the time and this in intervals of 1
minute. Once the time is up, you will hear an acoustic signal and the device automatically enters
standby mode.