Bergey VCSII, Owner'S Manual

Page: 16 / 19

VCS II User Guide – Bergey WindPower Co.
Rev: 0 June 17, 2016 16
VCS II Fault List
Fault (PID 30 & 31) Hex Code
Fault, over current chopper 1 [na] 0x00000001
Fault, over current chopper 2 [na] 0x00000002
Fault, over current chopper 3 [na]
0x00000004
Fault, over current chopper 4 [na] 0x00000008
Fault, over current chopper 5 [na]
0x00000010
Fault, over current chopper 6 [na] 0x00000020
Fault, over current chopper 7 [na] 0x00000040
Fault, over current chopper 8 [na]
0x00000080
Fault, De-saturation chopper 1 [na] 0x00000100
Fault, De-saturation chopper 2 [na]
0x00000200
Fault, De-saturation chopper 3 [na] 0x00000400
Fault, De-saturation chopper 4 [na] 0x00000800
Fault, De-saturation chopper 5 [na]
0x00001000
Fault, De-saturation chopper 6 [na] 0x00002000
Fault, De-saturation chopper 7 [na]
0x00004000
Fault, De-saturation chopper 8 [na] 0x00008000
Fault, Battery Over Voltage Fault (Volts) 0x00010000
Fault, DC bus over voltage [na]
0x00020000
Fault, Logic Power Supply Over Voltage (Volts) 0x00040000
Fault, Logic Power Supply Under Voltage (Volts)
0x00080000
Fault, battery over temp [na] 0x00100000
Fault, Heat sink over temp [na] 0x00200000
Fault, battery disconnect
0x00400000
Fault, Interrupt overrun [na] 0x00800000
Fault, alternator phase loss [na]
0x01000000
Fault, non-maskable interrupt [na] 0x02000000
Fault, D5V [na] - No parameter for this. Uses GPIO 0x04000000
Fault, PLL Sync
0x08000000
Fault, [EXCESS BUS CLAMPING] 0x10000000
Fault, Watchdog [na]
0x40000000