9
Video connection to TV
• The camera can transmit a video signal to an external monitor or to the video
input of a TV. Please refer to the monitor‘s instruction manual.
• Connect any suitable monitor to the TV-Out plug with the enclosed TV cable.
Inserting Memory Cards
• The unit supports both micro SD and SDHC memory cards as well as TF cards
with a capacity of up to 32 GB.
• Push in the memory card as shown in the diagram on the card slot. Never force
a card into the slot.
• When transporting memory cards, always wait until the card is at the temperature
of its surroundings before using it. Temperature changes and humidity can cause
condensation which can lead to short-circuits.
• To remove an SD / SDHC memory card from the slot, lightly press the raised edge
of the card until it springs out, and then remove it completely.
• SD / SDHC memory cards have a locking system that is designed to prevent un-
intentional erasing of data. Select the “LOCK” position on the side of the card. Ho-
wever, the camera cannot save images to the card if it is set to this position.
Basic operation
There are 3 different selector switches which perform the following tasks:
Mode
Delay
Resolution
Mode:
Off,
The camera is switched off
IR AIM
, This function enables camera direction settings. Set the switch to IR Aim,
lock the camera using the swing stoppers and place the camera in the desired po-
sition. A flashing blue LED will indicate movement detection in front of the camera
when the camera is correctly positioned. Readjust the positioning of the camera
until the blue LEDs begin to flash.
Setup (Configuration)
This switch position adjusts the date and the time. You can also use it to delete
images, set a camera number and indicate the battery status.
Set the switch to Set-up and the time will appear on the display. Use the "M" key
to scroll through the Menu: Time (12 hour clock, AM & PM), year (YYYY); month,
day (M, DD), Clr (delete), Id (camera number), AC (battery status).
Press "OK" to change to the modification mode and use the arrow keys to change
the value by scrolling up and down. Confirm changes with the "OK" key.
