11
Timer: ON/OFF.
Camera should only operate within a certain pre-selected period of time,
e.g. from 6:00pm to 7:00 am.
Serial no. ON/OFF.
. If you use several cameras in your area at same time, you
can stamp the no. of this certain camera in the taken photo, to show which ca-
mera has taken the photo.
Time lapse: ON/OFF.
In ON position photos will be taken without any detection
of the PIR. The time lapse can be adjusted from every 10 sec. to every 24 hours.
In this position the PIR is switched off.
SD = Circulate Record
aus [off] = switched off,
the camera does not take any more pictures once the
storage capacity of the SD-card has been reached.
an [on] = switched on,
the oldest images are overwritten once the storage ca-
pacity of the SD-card is reached.
SIde-PIR: ON/OFF.
In “OFF” pos. the side PIR’s are switched off and only the
main PIR is switched on. This is necessary if you want to monitor a burrow and
the movements can only come from ahead.
Delay time:
adjust the time where the camera is deactivated after the first de-
tection and be ready for the second detection. This gap can be adjusted from 1
sec to 120 minutes. If you want to take videos, the delay gap should not be shor-
ten than the video recording time, e.g. 15 sec recording time – minimum 20 sec
delay time.
TV-interface:
for European countries choose PAL system.
Date:
you can stamp date on photos.
Language:
You can choose between German, English, French, Swedish, Finisch.
Date / time:
set date and time.
Password: ON/OFF.
On position means you have to pre-select a password up to
4 digits to protect your camera against unmeant use. Default is “0000” You can
change this default in menu setting.
Pay attention:
If password is set, don’t forget it. Otherwise the camera cannot be
used anymore.
Shot button:
To take photos at once.
OK button:
to view pictures, with left/right button scroll through the pictures,
with up button zoom the pictures up to 4 x , with down button you come to all
thumbnail pictures on the SD card. With MENU button you can choose those
photos which you want to delete. In this menu setting you can choose to delete
one or all pictures or to format SD card.
