Translated user manual V6_EN
METO 1500XXXTS
37 / 47
9.11
Pipe rail system maintenance
The pipe rail system on which the
METO
runs should be checked on a regular basis. The
system should always satisfy the Horticulture Sector Guidelines for Pipe Rail Systems in
greenhouses (see 7.2). It is prohibited to use the Pipe rail wagon on a pipe rail system
that does not satisfy these guidelines. The employer is also responsible for periodically
checking tools and equipment according to the current Working Equipment Guidelines
that cover this.
Ensure that all the pipes have sufficient support with a maximum separation distance of
1.25 m in between and that the supports are not out of line with respect to the pipes.
Moreover, the pipes on the concrete path should be secured and must not be loose. At
the pipe ends (in front of the wall) there should be an end-stop welded on that is at least 5
cm high - at the end of each season check whether the stops are still functioning properly.
The ground under the pipe rail system should be dry, flat and hard. Soft or damp spots
should be repaired and surface indentations permanently repaired.
10.
Technical specifications
Type:
group 1500XXXTS
Dimensions [mm]:
Centre-to-centre
420-800
Length
1950
Breadth
h.o.h. + 160
Height of control panel
1740
Weight [kg] (c-to-c 550)
345
Motor power (Drive) [kW]
0.37
Motor power (Hose reel) [kW]
0.15
Motor power (Hydr.) [kW] *optie
0.5
Hydraulic system pressure [bar] * option
200
Hydr.fluid Visc. 46 [L] * option
1.5
Maximum speed on rails [m/min]
80
Maximum speed on concrete path [m/min]
160
Maximum fluid pressure [bar]
40
Voltage [Volt DC]
24
Battery capacity [Ah]
2x110
Noise level [dB]
<70
Physical operating conditions
Ambient temperature,
Transport & Storage
: 5 to +40 degrees Celsius
Working
: 5 to +40 degrees Celsius
Rel. Humidity (RH)
: 0% to 90%, not condensing
Lighting
: Normal ambient lighting.
The machine is not designed to be used outdoors.
The machine is not suitable for operating in explosive atmospheres.
