Translated user manual V6_EN
METO 1500XXXTS
20 / 47
8.2
Controls
Before using the
METO
spraying machine you must enter a number of settings so that the
desired spraying pattern can be set. If you have a
METO
Trans (automatic transfer wagon
for the
METO
) please consult the handbook that goes with it!
Switch ON the
METO
spraying machine, the screen now asks for the password
– enter
2678
, the main menu will now appear on the screen.
8.2.1
Adjusting
[LENGTH PATH]
Enter the length of the path.
[SPRAYINGSPEED FORWARDS]
Enter forward speed for driving to the rear outside wall, this is often 100% because
spraying is preferably done only on the return.
[SPRAYINGSPEED BACKWARDS]
Enter reverse driving speed for driving back to the main path, this is usually the speed that
is set for the correct level of emission of the spraying fluid.
[SPEED WITHOUT SPRAYING]
Enter the speed for driving when the spraying valves are shut off, this can be 100% if it
gives no harm to the crop.
[PRE-SPRAY TIME AFTER START
METO
]
If it is preferred that the
METO
unit sprays while driving forwards to the gable, this setting
can be selected so that spraying comes on before moving.
(standard
0.5 sec
)
