Translated user manual V3_EN
METO-SWT
7030.XX.XXXX
19 / 52
Carry out the following steps on the
METO-SWT
to adjust the height of a spray boom:
-
See figure 7.2 for the following operations
-
Pull the boom forwards and upwards at the same time, take account of the weight of
the spray boom, which needs to be held up by hand
-
Slide the spray boom vertically to the required height
-
Push the locking pins (bottom and top) in a slot and at the same time allow the spray
boom to drop gently so that it locks into the spray boom mast.
7.6
Setting the mix injector
The
METO-SWT
is provided with a mix injector in order to keep the liquid in the tank
moving.
Attention! Before filling the tank, set this valve in the desired position!
The mix injector can be operated with a manual ball valve. This valve can be set open or
closed. The preference is to keep the mix injector always open for a good distribution of
the additives in the water.
Valve closed, mix injector inactive
Valve open, mix injector active (preference!)
