Berg Engineering & Sales Company NS-11006, Instruction Manual

Page: 23 / 90

Operation and Menu Structure
NewSonic SonoDur-R Issue 105 06/2020 Page 23
7.3 Entry input via the system keyboard
Any position can be marked and changed or added to in the input field. The system keyboard
(software keyboard) appears automatically when an input field is selected.
Using the “Back” softkey
closes the system keyboard.
7.4 Main Menu Measuring
The SonoDur-R testing device must be in the measuring menu (main menu), in order to be able to
invoke a measurement. The "measurement menu" can be accessed from any programme point via
the Exit-Button. The measurements with motor and hand-held measuring probes are described
below. When measuring using hand-held measuring probes, a horizontal coloured bar appears above
the buttons Menu, Exit and Info, which represents a measurement of the speed in which the force is
applied. This shall provide the operator with an indication for the correct handling of the probe.
Short bar (left end) = force application too fast, Middle = OK Long bar (right end) = force application
too slow (refer to
Figure 7.8
to
Figure 7.10
).
Figure 7.7
Figure 7.8 Figure 7.9 Figure 7.10