6
Solar storage tanks are specifically designed for integra-
tion in central heating systems (not for DHW use).
The most important technical features of these storage
tanks are:
- The tank and coils (only for models where provided)
are specially designed and shaped for optimum per-
formance in terms of stratification, heat exchange and
replenishment times.
- Water fittings are available at different heights, permit-
ting different hot water generators to be used without
reducing the stratification effect.
- CFC-free polyurethane insulation and an elegant exter-
nal coating reduce heat loss and improve efficiency.
- A flange is provided for easy cleaning and to allow an
extra heat exchanger to be added (only for models
where provided).
Storage tanks can be connected to a special solar con-
troller and can be integrated in solar heating systems in
which Riello boilers or water heaters serve as auxiliary
heat generators.
STOR
solar storage tanks are identified by three plates. (On models STOR 2000 - 3000 - 5000 these must be applied
by the installer after the insulation has been fitted, see page 12).
b
If these plates or any other means of clearly identifying the product are defaced,
removed or lost, proper installation and servicing may be rendered difficult.
– Data plate
This lists the technical specifications and performance of the product.
– Product identification plate
This bears the name of the product.
– Serial number plate
This specifies the serial number, model, consumption
and capacity.
Product description
Identification
ACCUMULO INERZIALE
