24
24
To install
CONNECT LE
inside the box, proceed as follows:
- Insert the right side of the
CONNECT LE
inside the box and rotate the left side
until the
CONNECT LE
enters completely making sure that the insulator cover-
ing the mixing bottle is not damaged
- Insert the hook (2) of the mixing bottle and attach to the hook (3) on the back
of the box
- Position the system delivery and return pipes into the seats positioned on the
rack (4) making sure that the nuts (5) are positioned below the rack itself
-
4
5
2
3
Remove the protective plug (1) on the mixing bottle
- Fit the pipes (6) and (7) on the couplings (6a) and (7a), located on the mixing
bottle and positioning the designated seals supplied
- Insert the thermometer/s (T1-T2) inside the seat
1
T2
6a
7a
T1
6
7
- Using the designated clips, secure the thermometer bulbs following the se-
quence (from left to right): thermometer (T1) to the ramp (C1) located below
the BT1 system circulation unit and the thermometer (T2) to the ramp (C2)
located below the BT2 system circulation unit
-
C2
C1
T2
T1
Place the bracket (8) together with the electrical connection box (9), on the
rack (4) and secure it with the designated screws supplied.
1
T2
6
6a
7
7a
T1
9
8
4
b
The hydraulic module is supplied already wired to the drivers of the module
itself. For other connections, please refer to the wiring diagrams in this docu-
ment (see
“1.9 Wiring diagram” a pagina 21)
