23
23
2 INSTALLATION
2.1 Receiving the product
The
CONNECT LE
(1) is supplied in one package, protected by cardboard packaging
(2) inside of which there is a plastic envelope containing:
- Plumbing connection ramps (3) towards the heat generator
- Thermometers (4), only for low temperature zones and retaining clip for the
relative bulbs
- Brackets (5) and wiring case (6)
- Instruction manual (7)
2
1
7
5
6
4
3
b
The packing material is to be conserved and not discarded as it could be po-
tentially dangerous.
2.2 Dimensions and weights
L
P
H
CONNECT LE
BASe MIx 1
BASe MIx 2
W
400
D
160
H
720
Net weight of box (*)
8
Net weight of appliance
15
18
(*)
The box is supplied separately, on request as an accessory .
2.3 Installation inside the box
b
Before installing
CONNECT LE
inside the box, check that all the connectors
are correctly tightened.
b
If the insulation kit is to be fitted, supplied as an accessory upon request, en
-
sure that the hydraulic module inside the box is correctly positioned.
b
A suction pipe is inserted inside the mixing bottle and this must not under any
circumstances be removed. Do not remove the closing plug (1) of the suction
pipe, located on the top connector of the mixing bottle, until instructions to do
this are given.
1
