<07>
REMOVABLE WATER TANK
CONNECTION
CAUTIONS
When the water tank is full, with approximately 2000ml of water collected, the
unit will automatically switched off and the „Red” LED will come on.
To remove the water tank, first switch off the mini dehumidifier, press „ON/OFF”
button to the „OFF„ position. Then, remove the water tank from the unit and
pour the water out to the toilet or bathroom. Put the water tank back into the
unit. To continue dehumidifying, press the „ON/OFF” button to „ON„ position
again.
1. After having finished using the mini dehumidifier, the user should switch the
unit off by pressing the „ON/OFF” button to „OFF„ position.
2. Avoid using the dehumidifier and AC cord in wet or damp place, and po
-
sition it in areas where the air ventilation is good.
3. Keep the front inlet grill and the side outlet grill clear at all times and do not
cover with clothing or poly bags etc.
4. Always keep the unit at an up-right position to avoid water leakage.
1. After removing the packaging materials, there should be 2 items: Mini De
-
humidifier & AC Wire Cord.
2. Put the dehumidifier on the flat place, plug the output of AC wire cord to the
AC socket of dehumidifier, then connect the input plug to the appropriate
main socket.
3. Press the „ON/OFF” button to „ON” or ”I” position, the mini dehumidifier will
begin to operate. The green LED will be turned on. At the same time, the
UV&Tio2 will be turned as well, the side Blue led will lighting. Listen and
feel for the air blowing from dry air outlet.
4. To switch off the unit, press „ON/OFF” button to „OFF” or “O” position, the
mini dehumidifier will be turned off.
