6
ASSEMBLY
Install the lift arm (item 1) by inserting it in the tube
(item 2).
Secure in place with two 3/8 x 3/4" hex bolts (item 3)
and flange nuts.
Tighten firmly.
Install the push bar (item 1) by inserting it in the sleeve
(item 2) welded on the pivot support (item 3).
Secure the other end in the fork (item 4) with a pin (item
5) the head toward the outside, a flat washer (item 6)
and 2.5 mm hair pin (item 7).
Install the handle support (item 1) on the left side
support (item 2) with two 3/8 x 1’’ hex bolts (item 3) and
secure with flange nuts.
Install the plastic grommet (item 4) on the handle
support (item 1).
Install lift arm
Install push bar
Install handle support