106078 L-03
ASSEMBLY
INSTALLATION:
Remove the flange nuts M8 (item 1) and the
carriage bolts M8 x 65mm (item 2) from the right
and left adjustable support assemblies (item 3).
This will allow you to remove the 13mm tools (item
4) that you will use during the rest of the installation.
Place in a satisfactory and temporary position the
right (item 1) and left (item 2) adjustable support
assembly on the handles of the snowblower as
determined previously with the nuts and bolts
previously removed.
Tighten the nuts lightly (item 3).
This will allow you to freely adjust the assembly in the
following steps.
Install the adjustable support assemblies.
Insert the right pipe assembly (item1) and the left pipe
assembly (item 2) in the adjustable support
assemblies (item 3) as shown.
Install the left and right pipe assemblies.
Insert the central pipe (item 1) between the pipe
assemblies (items 2 & 3) as shown.
Make sure the central pipe is well inserted in the snap
in buttons .
Install the central pipe
Install the assembled extensions
Insert the assembled extensions (item 1) in the right
and left pipe assemblies (item 2) up to the pressure
buttons as shown.
Remove the nuts and bolts.
