101
Installation
6003417_a – 26.09.2017
EN
3.4.6
Establish electrical power supply
☞
Observe the voltage specifications on the rating plate.
☞
Plug the connecting cable mains plug into the socket.
☞
Route the cable such that it is not kinked, crushed or
damaged and so that it will not get in the way when
replacing the filter filling.
☞
Make sure the device can be disconnected from the
electricity supply after installation.
3.4.7
Installing the recirculated air filter permalyt
☞
Connect the recirculated air filter permalyt as follows:
y
Wire 1 on terminal 1
y
Wire 2 on terminal 2
☞
Plug the cold device plug into the socket on the fan
housing.
A connection check takes place automatically:
y
If the device is not connected correctly, five beeps will
sound.
☞
Correct the connection of the wires to terminals 1 and
2.
y
If the device is connected correctly, three will beeps
sound.
☞
Insert the recirculated air filter permalyt.
☞
Lay the cable from the recirculated air filter permalyt
through the guide channel.
Summary of Contents for Smartline BKH 80 ST
Page 112: ...6003417_a 26 09 2017 ...
