45
The WLAN connection is stored until the WPS function is activated again.
The sound system’s WPS function can always be started, regardless of
the source selected. The WPS function is active as soon as the Status
indicator flashes white.
If a network is not yet present, the WLAN connection can also be set up
at a later time. In this case the sound system can only be controlled using
the buttons mounted directly on the extractor hood.
With a WLAN connection audio playback is only possible via Bluetooth.
Access Point set-up
Access point
The sound system supports the setting up of a WLAN connection using
Access Point. This means that the sound system establishes its own
WLAN for the duration of the process in which the WLAN settings are
configured. This WLAN is disabled again as soon as the configuration is
complete. The sound system starts with the new configuration, and
establishes a connection to the WLAN which has now been set up.
Creating a
WLAN
connection
Switch the sound system on if necessary.
The first step is to activate the sound system’s access point.
This is accomplished by holding the
and
buttons pressed
in simultaneously until the Status indicator flashes pink.
The sound system now starts the WLAN access point.
The following steps must be completed within a period of about five
minutes. After this time the sound system automatically leaves access
point mode.
Locate the smartphone or tablet PC on which the Berbel app is
installed, and connect it to the WLAN access point. The network name
(SSID) and also the password are “
berbel AP
”.
Start the app for controlling the sound system, and set up the WLAN
by completing the individual steps of the app’s Setup Assistant.
Close the app, and connect the smartphone or tablet to the same
WLAN to which you have connected the sound system.
The app will automatically search for the sound system when you
restart it.
As soon as the sound system has been detected, you can select it to
play music. (Details on this can be found in the chapter entitled “
App
operation
”.)
The WLAN connection is stored until the WPS function is restarted, or a
new configuration is stored using the access point.
Access point mode can be stopped by holding the
and
buttons pressed in again. Access point mode automatically closes after
five minutes.
Summary of Contents for Skyline Edge Sound
