Berbel Skyline Edge Sound, Operating Instructions Manual

Page: 38 / 104

38
Bluetooth playback
The sound system’s integral Bluetooth interface makes it possible to
transfer music by wireless means from devices such as smartphones,
table PCs, iPods etc.

The mobile device must support the A2DP Bluetooth audio transfer
protocol if you wish to transfer Bluetooth audio from a mobile device to
the sound system.
Selecting the
Bluetooth
source

First press the button the extractor hood to select the Bluetooth
source; alternatively you can use the App. The source is selected when
the Status indicator flashes blue or lights up solid blue.
Setting up an
audio transfer

If you wish to play music from a Bluetooth-enabled device through the
sound system, the external device must first be bound (pairing process).
This is the procedure for making a connection:

The sound system is ready to connect when the Status indicator
flashes blue.

If the Status indicator lights up solid blue instead of flashing blue,
then the device is already connected. If you wish to make a new
connection with another device, the first step must always be to
disconnect the existing one.

When the Status indicator flashes blue, you can start the search for
Bluetooth devices on your mobile device.

Once the sound system is found, connect it to your mobile device.
The Status indicator switches from flashing blue to solid blue when the
connection is successful.
 If your device requests a PIN code, this should always be ‘0000’.

Due to the large number of different devices available it is only possible
here to provide a general description for setting up the radio link. For
detailed information on this aspect please refer to the operating
instructions supplied with your device.