24
Operation
6006113_0 – 12.11.2021
4.6.2
Lift function
When the device is connected to a ceiling lift hood, the lift
function can be performed as follows.
Press the slider at the position below the
symbol to move the hood down.
Press the slider at the position below the
symbol to move the hood up.
4.6.3
Synchronisation
If the extractor hood or a ceiling connection is equipped
with effect lighting, the brightness of the lighting can be
synchronised with the hob lighting.
Requirement:
y
All light sources of the extractor hood are
switched off.
☞
Press the slider at the position below the
symbol (> 1 second).
y
All light sources switch on at the same
time with full brightness.
☞
Press the slider at the position below the
symbol (> 1 second) again.
y
All light sources switch off at the same
time.
4.6.4
Effect lighting
If the extractor hood is equipped with effect lighting,
the function may be used independent of the fan.
Switching on and off is possible at any time.
☞
Press the slider at the position below the
symbol to switch the effect lighting on or
off.
4.6.5
Hob lighting
If the extractor hood is equipped with hob lighting, the
function may be used independent of the fan. Switching on
and off is possible at any time. With activation of the cooking
zone, the hob lighting is also switched on automatically.
☞
Press the slider at the position below the
symbol to switch the hob lighting on or off.
4.6.6
Run-on function
The extractor hood comes with a run-on function. If this
function is used, the extractor hood will operate for a further
10 minutes after it has been switched off.
In recirculated air mode, it is necessary to use the run-
on function so that the extractor hood can remove the
remaining odours. Using the run-on function increases the
life of the filter filling. The filter filling must be replaced at
regular intervals.
The run-on function can be switched on manually or
automatically. The extractor hood is delivered with the
automatic run-on function active, and settings are made
in configuration mode.
Observe the extractor hood instructions.
The extractor hood is switched on, and an
arbitrary power level is selected.
☞
Press the slider at the position below the
symbol.
y
The run-on time (10 minutes) starts in the
power level 1.
y
The button for the active power level
glows.
y
It is possible to switch between the power
levels.
If menu level 2 is selected again, the run-on
function key flashes.
If the minus button is touched again,
the run-on function stops.
Summary of Contents for Panorama BKF 90 iPP
Page 32: ...6006113_0 12 11 2021 ...