Berbel Downline Infinity BKA 90 DLI Operating And Installation Instructions Download Page 37

Page: 37 / 44

Maintenance

6006047_0 – 02.09.2021

☞

Remove the filter cartridge.

Horizontal recirculated air filter (with installation variants with
blow-out grate kit)

☞

Remove the blow-out grate from the brackets.

☞

Remove the filter cartridges.

Filter cartridge

☞

Unscrew the screws on the bottom of the filter cartridge.

☞

Open the filter cartridge by removing the filter bottom.

☞

Empty the filter completely.

☞

Fill the filter with new charcoal up to the maximum level.

☞

Screw the filter cartridge back in place.

☞

Clean the filter from the outside (e.g. through extraction
with a vacuum cleaner).

☞

Insert the filter cartridge in the filter housing.

☞

Fold in the filter cartridge.

☞

Lock the magnetic latches on the filter housing.

Summary of Contents for Downline Infinity BKA 90 DLI













































Search results

Summary of Contents for Downline Infinity BKA 90 DLI

Reviews:

Related manuals for Downline Infinity BKA 90 DLI

Brands by name

Popular brands

Berbel Downline Infinity BKA 90 DLI, Operating And Installation Instructions

Search results

Summary of Contents for Downline Infinity BKA 90 DLI

Reviews:

Related manuals for Downline Infinity BKA 90 DLI

Brands by name

Popular brands