Berbel BLB 60 FL Operating And Installation Instructions Download Page 40

Page: 40 / 64

Preparation for installation

Installation instructions

Tools and equipment needed

For installation you need the following tools, materials
and documents:



Folding ruler



Pencil



Cross-head screwdriver



2.5 mm ball Allen key



Jigsaw



Thick cardboard e.g. to protect the cooking hob

and the work surface



These installation instructions

Unpacking

CAUTION

Risk of injury from broken glass.

Wear protective gloves.

Unpack the device carefully.

Do not touch broken glass.

ATTENTION

Damage to the surfaces from improper
unpacking.

Cut the packing tape and straps with
scissors.

Do not cut into the protective
cardboard packaging.

ATTENTION

Scratched surfaces from metallic,
sharp-edged objects, e.g. belt buckles
or tools during transport.

Transport the device without any
contact to objects that could scratch
the device.

Remove the packing foil and the cardboard
packaging.

If present, cut off the holding strap with scissors.

Summary of Contents for BLB 60 FL

































































Search results

Summary of Contents for BLB 60 FL

Reviews:

Related manuals for BLB 60 FL

Brands by name

Popular brands

Berbel BLB 60 FL, Operating And Installation Instructions

Search results

Summary of Contents for BLB 60 FL

Reviews:

Related manuals for BLB 60 FL

Brands by name

Popular brands